Leader LT4610-SER01, Instruction Manual

Page: 55 / 272

6. PANEL DESCRIPTION
34
6.2 Rear Panel
No. Name Description
1 LTC IN/OUT (SER01) Time code I/O connector. It also outputs alarms.
2 GPS IN (SER01) GPS antenna input connector.
3 CW IN/OUT (SER01) CW I/O connector. This connector is used by switching between input
and output.
When set to input, it receives 10 MHz CW signals.
When set to output, it outputs 10 MHz CW or 1PPS signals.
4 12G-SDI (SER02) SDI output connectors. They output SD, HD, 3G, and 12G signals.
5 AES/EBU (SER23) AES/EBU signal output connector.
6 SILENCE (SER23) Muted AES/EBU signal output connector.
7 WCLK 48 kHz word-clock output connector.
8 Ground terminal Connect to an external ground.
9 ETHERNET/CONTROL Ethernet port. It supports SNMP.
10 GENLOCK IN Genlock input connectors. They are loop-through connectors.
They receive HD tri-level sync or NTSC/PAL black burst signals.
11 ANALOG BLACK OUT
1 to 3
Black output connectors.
They output HD tri-level sync or NTSC/PAL black burst signals.
12 ANALOG BLACK OUT
4 to 6 (SER21)
Black output connectors.
They output HD tri-level sync or NTSC/PAL black burst signals.
13 SDI OUT SDI output connectors. Outputs SD, HD, and 3G signals.
14 SFP Port (SER03) A PTP-compatible Ethernet SFP port.
Connect an SFP or SFP+ module for use.
15 RJ45 port (SER03) A PTP-compatible Ethernet RJ45 port.
16 Serial label The serial number is printed on this label.
17 Fan Cooling fan for the instrument.
18 AC INPUT 2 AC inlet for the second power supply.
19 AC INPUT 1 AC inlet for the first power supply.