Leader LT4610-SER01, Instruction Manual

Page: 181 / 272

19. SYSTEM MENU
160
19.4 Configuring Ethernet Settings
Under SYSTEM→ETHERNET, you can set Ethernet parameters.
０．ＳＹＳＴＥＭ

ＥＴＨＥＲＮＥＴ
↵
19.4.1 Setting the IP Address
To set the IP address, subnet mask, and default gateway, follow the procedure below.

２．ＩＰ ＡＤＤＲＥＳＳ
１９２．１６８．０００．００１ ２．ＳＵＢＮＥＴ ＭＡＳＫ
２５５．２５５．２５５．０００


２．ＤＥＦＡＵＬＴ ＧＡＴＥＷＡＹ
０００．０００．０００．０００ ３．ＣＯＮＦＩＲＭ
■ＯＫ □ＣＡＮＣＥＬ
Procedure
SYSTEM → ETHERNET → IP ADDRESS
Parameters
000.000.000.000 to 255.255.255.255
(IP ADDRESS default value: 192.168.000.001
、 SUBNET MASK default value:
255.255.255.000,
DEFAULT GATEWAY default value: 000.000.000.000)
19.4.2 Viewing the MAC Address
To view the MAC address of the LT 4110, follow the procedure below.
２．ＭＡＣ ＡＤＤＲＥＳＳ
＊＊：＊＊：＊＊：＊＊：＊＊：＊＊
Procedure
SYSTEM → ETHERNET → MAC ADDRESS
19.4.3 Turning TRAP Transmission On and Off
To turn the SNMP TRAP transmission on and off, follow the procedure below.
２．ＳＮＭＰ ＴＲＡＰ
□ＯＮ ■ＯＦＦ
Procedure
SYSTEM → ETHERNET → SNMP TRAP
Parameters
ON / OFF