Leader LT4610-SER01, Instruction Manual

Page: 127 / 272

12. SDI MENU (SER22)
106
12.10.6 Setting Clicks
You can insert click sounds into the selected channel. Follow the procedure below to set the
insertion interval to a value other than OFF.
This is invalid when LIPSYNC is set to ON.
５．Ｇ１／ＣＨ１ ＣＬＩＣＫ
►＊ＯＦＦ
Procedure (SDI OUTPUT option)
SDI → SDI1 → AUDIO (→ LINK -A / LINK-B)
→ G1 → CH1 / CH2 / CH3 / CH4 → CLICK
→ G2 → CH5 / CH6 / CH7 / CH8 → CLICK
→ G3 → CH9 / CH10 / CH11 / CH12 → CLICK
→ G4 → CH13 / CH14 / CH15 / CH16 → CLICK
Procedure (12G option)
12G OP
TION → SDI 1 → AUDIO (→ LINK -A / LINK-B)
→ G1 → CH1 / CH2 / CH3 / CH4 → CLICK
→ G2 → CH5 / CH6 / CH7 / CH8 → CLICK
→ G3 → CH9 / CH10 / CH11 / CH12 → CLICK
→ G4 → CH13 / CH14 / CH15 / CH16 → CLICK
Parameters
OFF / 1sec / 2sec / 4sec
12.10.7 Settings Shared by Links
If the output signal is HD(DL) or 3G-B, the link B settings can be linked to link A settings by
following the procedure below to select ON. In this situation, link B cannot be set.
４．ＳＤＩ１ Ｌ－Ｂ ＥＱＵＡＬ Ｌ－Ａ
■ＯＮ □ＯＦＦ
Procedure (SDI OUTPUT option)
SDI → SDI1 → AUDIO → LINK - B → EQUAL TO L INK-A
Procedure (12G option)
12G OPTION → SDI 1 → AUDIO → LINK - B → EQUAL TO LINK -A
Parameters
ON / OFF