ruby standard configuration User Manual
Version: 6.4.0/2
77/179
8. Operation
8.9.5
Dynamics
Dynamics parameters are available for all sources.
The dynamics DSP provides an independent compressor, expander and gate. For MIC 01-10, a de-esser and
automix are also available.
Ø
To access the dyanmics parameters, press an
ACCESS
key followed by
DYN
on the Central Module.
The fader strip controls update to show the last page adjusted - in our example, the Compressor:
Surface Controls (Compressor)
DisplayDock
Ø
Press down on the left (master) rotary control to cycle through the available pages: Compressor, Expander,
Gate and De-Esser/AutoMix (if available).
Ø
Keep pressing to return to the Compressor (page 1).
The Dynamics graph on DisplayDock includes a green ball which represents the output level of the
complete Dynamics section: Compressor, Expander and Gate. This changes dynamically as the signal
level varies, and so is extremely helpful when adjusting parameters.
If a red ball is also visible, then this represents the output level of the De-Esser.
