ruby standard configuration User Manual
Version: 6.4.0/2
144/179
9. The Web UI
9.7.6
Nodes Tab
This tab lists all available network Nodes, showing their Device ID, announcement method (mDNS or SAP), TTL
(in seconds), and IP address. You may create static streams using Ember+, and these streams are shown in
the list as well.
Clicking on a name in the “Name” column opens the device's Web page. You can use this to access further
information.
Pay particular attention to the "State Flags" which show the condition of the network node. There is a key at the
bottom of the page which explains the meaning of each flag.
Above the flag descriptions is the
Update
selector. This can be set to one of two possibilities:
Data only
(the
default) or
Data + TTL
. This defines what happens when the transmitter's MDNS / SAP announcement for a
stream is made. If
Data + TTL
is selected, then the TTLs will be reset to the "Nodes List TTLs" value defined in
ON-AIR Designer. Once the TTL count-down has expired, the node will remove the associated stream. This is
generally needed only for diagnostic purposes.
