ruby standard configuration User Manual
Version: 6.4.0/2
159/179
10. Maintentance
10.3
Control Surface Procedures
10.3.1 The Special Functions Mode
Each of the control surface modules offers a “special functions” mode. This can be used to adjust system
settings and test the module's components (lamps, buttons, etc.)
Double-click on the links below to open the special functions mode documentation (as a pdf):
·
ruby Fader Module SF mode
·
ruby Central Module SF mode
10.3.2 Replacing Defective Parts
The CAN bus is hot-pluggable which means that the control surface can be connected and disconnected during
uptime. This allows fast replacement of a frame in the case of a hardware failure. Providing the replacement
frame is set to the correct CAN bus addresses, it will immediately take over the same functions as the exchanged
frame.
