ruby standard configuration User Manual
Version: 6.4.0/2
17/179
5. Specification
5.3
Default Audio Assignments
The tables which follow list the default audio assignments for the inputs and outputs.
For the inputs, the source assignments are fixed and cannot be changed by the user. Instead, you can choose
which inputs are active in the mix by changing the fader strip
For the outputs, the configuration loads the default audio assignments. These can be modified from the
(in DisplayDock).
5.3.1
IO Cards (Rear Panel)
Slots 1 and 2 are
always
fitted with a STUDIO IO card (slot 1) and a MIC/LINE IN card (slot 2). The MIC/LINE
IN card has inputs only; the STUDIO IO card provides both inputs and outputs.
Slots 3 to 8 can be equipped with additional LINE IN, LINE OUT or AES3 IO (as described
). If a slot is
fitted with an output-only card, then the corresponding sources will have no audio input! Similarly, if a slot is
fitted with an input-only card, then the corresponding destinations have no audio output!
STUDIO I/O (Slot 1)
Input Number
Source Name
Format
1
MIC 1
mono
2
MIC 2
mono
STUDIO I/O (Slot 1)
Output
Local Matrix Name
Format
Default Audio from
Line 1/2
LINE OUT
left/right
MON CR
HP 1 L/R
HP 1
left/right
MON HP
HP 2 L/R
HP 2
left/right
MON GUEST
MIC/LINE IN (Slot 2)
Input Number
Source Name
Format
1
MIC 3
mono
2
MIC 4
mono
3
MIC 5
mono
4
MIC 6
mono
5
MIC 7
mono
6
MIC 8
mono
7
MIC 9
mono
8
MIC 10
mono
