LAUNCH KWA-300 3D Wireless Wheel Aligner FAQ
5-1
Frequently Asked
Questions (FAQ)
Industrial Computer Cannot
Start Up, Without Any Prompts.
z
Check the power socket and plug.
z
Check the connection. Check the power switches
of main unit and monitor. Check the indicator.
z
Check the contrast and brightness.
Computer Cannot Enter
Windows XP.
z
The hardware start files are lost.
z
BISO setting error.
z
Hardware malfunction.
Mouse and Keyboard does not
Respond
z
Check the connection of mouse and/or keyboard.
z
Check the matching of mouse and/or keyboard to
main unit.
z
Mouse or keyboard damaged.
z
Mouse ball too dirty.
Printer does not Respond
z
Check connection of printer cables.
z
Check printer drive program and settings.
z
Check computer virus.
KWA-300 3D Program Does Not
Run
z
Program file lost or error.
z
Program registry list damaged.
Why the blocking tip box does
not appear when you turn the
steering wheel and block the
rear target?
It is normal. The test result will not be influenced
without tip box, but please do not block any one of the
front targets when you test the extremum point and
toe-out on turns.
When you turn the steering
wheel, the tip box appears in
case of the light path has been
blocked, how to handle it?
If the tip box appears among the 20
º
area, please stop
turning the steering wheel, move the blocks away and
then continue to turn the steering wheel.
Why does it have obvious
difference between left and right
minimum turning radius after
alignment?
It is caused by the mistaken position between the
steering wheel and the steering column. Alignment in
this system is performed in the normal case of Steering
Wheel Centered, i.e. it is based on Steering Wheel
Centered, so it is necessary to ask the user about the
maintenance and use history of the steering wheel,
eliminating the interference of the mistaken position
between the steering wheel and the steering column,
centering the steering wheel according to the
experience.
Summary of Contents for KWA-300
Page 1: ......
