LAUNCH KWA-300 3D Wheel Aligner Operation Instructions
4-2
Management] - [Commonly used data management]).
[Selected from standard data]: If there is no the
vehicle model you want, you can directly search for the
vehicle model you want from the standard database,
and directly perform the next-step operation
（
This
vehicle model is no longer saved in the commonly used
data list
）
. If you want to add this vehicle model into the
commonly used data list, it needs to be added from the
interface of [System Management] - [Standard Data
Management]).
[Quick search]: The input box for quick search aiming at
the vehicle model is provided at the bottom of the
interface. Please input the first letter of the vehicle
model to perform the searching operation.
[Tire parameter]: When the unit of toe-in is used in mm
or In (The unit of toe-in can be set in [System
Management] – [System setting]), the diameter of the
present tire must be input.
[Help]: To provide the description of operating method
and note.
Operating procedures:
Select the corresponding vehicle model item in
[Commonly used data list], then click [Next].
Note:
1.
When the toe of the system uses linear
measure, it is required to enter the vehicle
tire diameter at the right bottom corner on
this interface, otherwise the system cannot
enter the next operating procedure
2.
The form currently provided is the same form
with Commonly Used Data Management in
the System Management interface, in the
same way, you can click
button to add
the standard data provided by the system
into this form. If you want to add user-defined
data, you need to add it from Standard Data
Management interface of System
Management. The unit of Wheelbase, Front
wheelbase and Rear wheelbase is mm.
Special Measurement:
For different data of vehicle model, some special
measurement methods and operating procedures will
occur:
1.
Aiming at some vehicle model of Benz, the system
provides the operations for measuring the standard
data with gradient meter. When the data selected is
of Benz vehicle, the system will pop up a dialogue
box as shown in Fig.4.4.
Fig.4.4
The interface for vehicle level measurement is displayed
in Fig.4.5.
Fig.4.5
Use gradient meter—the special measurement
instrument (optional) to get the level values of four
wheels, which are displayed in the editing boxes. Also,
the operator can take the level value scopes displayed
on the top of the editing boxes as the reference, and
manually input the corresponding level values of four
wheels.
[Vehicle Adjustment Help]: It provides the using method
of the gradient meter for Benz vehicle, the operator can
perform the vehicle test and adjustment with the
reference of the operating methods in Help interface as
shown in Fig.4.6.
Fig.4.6
Operating procedures:
Vehicle
adjustment
Help
Summary of Contents for KWA-300
Page 1: ......
