LAUNCH KWA-300 3D Wheel Aligner Structures
2-1
Structures
Overall Structures
KWA-300 3D Wheel Aligner mainly consists of the main
unit, cameras, posts, wheel clamps, targets,
communication cables, mechanical turntables,
steering wheel holder and brake pedal depressor, etc.
Main Unit
The main unit is an operation control platform. It consists
of cabinet, computer group, interface circuit system and
power supply assembly, etc., as shown in Fig.2.1.
The computer group includes computer, monitor,
keyboard, mouse, printer and image collector, etc. The
monitor, mouse and printer are installed inside the upper
compartment of the cabinet. The image collector is
inside the computer and the keyboard is installed on the
keyboard drawer.
The power supply assembly includes power lead, power
socket and the power supply master switch. The power
supply master switch button is installed at the upper part
of the right sideboard of cabinet, and the power supply
socket is at the lower compartment of the cabinet.
Fig.2.1
Cameras and posts
KWA-300 3D wheel aligner includes 4 CCD cameras,
which respectively capture the images from the 4 targets
attached on the vehicle wheels. The cameras are
mounted inside the steel housings as shown in Fig. 2.2.
The accurate calibration for camera has been performed
during first installation, so it is not necessary for user to
calibrate it when using the instrument.
Fig.2.2
The two posts of KWA-300 3D wheel aligner are used
for holding and fastening the CCD cameras and their
Summary of Contents for KWA-300
Page 1: ......
