LAUNCH
X-631 Wheel Aligner Product Service Manual Appendix 6
10-4
Camber 1 is displayed on the screen of the probe rod
2.
Remove the probe rod and install it on another end of the same calibration shaft. Adjust the probe rod level
according to the indication of the mechanical level bubble of the probe rod, and then lock the probe rod well.
Record the value of Camber 2 displayed on the screen of the probe rod; keep the probe rod still and evenly adjust
the two adjusting screws under the bracket while observing the change of Camber 2; Stop adjustment operation
when the value of Camber 2 is coming to (Camber 1 + Camber 2)/2.
