Laski Predator, Operating Instructions Manual

Page: 33 / 59

Predátor P 56RX
33
- Push the key to activate the remote controller while the ignition key is set in
the position 1.
-
Set the ignition key in the position „START“ and start up the engine
- When the engine roars to life, release the key and let the engine run warm at
idling.
Fig. 13 - View under the rear hinged cover
with battery and emergency stop button above
Fig. 14 – Switch box
1 – removable ignition key, 2 – display, 3 –
free, 4 – free, 5 – button for parameters
change , 6 – Indicator lamp
Do not crank the engine for a longer time than 10 sec. Keep an interval
between two starts (standstill) 30 sec at least.
NOTICE: It is also necessary to reactivate the remote controller
Display „2“ shows the following values: engine speed and hours, oil
pressure and temperature, cooling fluid temperature, % torque, error
messages
Button for parameter showing „5“ – by pressing the button you can
browse particular engine parameters