Laski Predator, Operating Instructions Manual

Page: 39 / 59

Predátor P 56RX
39
5. Check condition of the keeper plate.
If badly worn or damaged, replace.
Replace the blade with a new one.
6. Make sure that all surfaces are clean and
free from dirt. Re-fit the threaded insert,
then the new blade and the keeper block together.
Tap the front of the keeper block until it is
located (fig. 19). Insert the bolt and tighten it to a
torque of 55 Nm. After about ten minutes
of use stop and check bolt tightness again.
If the assembly cannot be
tightened
sufficiently into the head, do
not use it.
Never
use this system
without all the
components being in place
and secure.
Maintenance and
Replacement of
LASKI Blades
Fig. 19 – Assembly
Fig. 20 – Saw blade Multi-Tip