Laski Predator, Operating Instructions Manual

Page: 53 / 59

Predátor P 56RX
53
Engine
runs hot
- LED for
cylinder
head
temperatur
e lights
(option)
Engine oil level exceeds
MAX mark
Insufficient cooling:
- cooling system fouled
- loosened cooling air
ducting Drain engine oil as needed
- check entire system and clean
it as
needed
- check cooling air ducting for
tightness
Cutting
head
cannot be
set in
motion
Blown fuse Replace
Insufficient
cutting
quality
Blades blunt Remove blades and regrind,
resp. change them as needed SERVICE
Note: The note "SERVICE" in the "Remedy" column means that this operation should be
done by an authorised service only.
Blades edge regrinding requires high demands for keeping optimal cutting
edge shape. While regrinding it is necessary to keep the same weight of
particular blades because of balance of their rotating mass. We
recommend calling the manufacturer Laski s.r.o. for assistance.