Laski Predator, Operating Instructions Manual

Page: 49 / 59

Predátor P 56RX
49
Fig. 57 – Battery Remote Control
Should the battery be fully discharged, it can be replaced by a new one. The battery
is accessible under the cover in the bottom of the remote control unit.
Wired Emergency Control
Should the battery of the remote control unit be fully discharged, it is possible to use
a connecting cable that should interconnect the remote control unit and the electronic
control box. This cable is included in the remote control kit.
Maintenance Intervals
Tab. 5 – Machine maintenance
Maintenance intervals Maintenance to be done
Every 8 – 15 hours,
respectively daily checks
before starting Engine oil / hydraulic oil – top up if necessary.
Air suction part.
Check up cooling air and fluid intake space.
Be sure that there is no debris that may break loose
when the cutter is started.
Contingent engine oil / hydraulic oil leaks.
Make sure that all retaining bolts on the cutting head
are tight.
Access covers and guards must be securely fitted.
Check and clean the air filter and remove any debris
from within the engine covers and the oil cooler. Refer
to Engine Manual for cleaning of the entire air cooling
system.