![background image](http://html1.mh-extra.com/html/larson-electronics/atex-expcmr-ip-poe-2mpir-108d/atex-expcmr-ip-poe-2mpir-108d_quick-installation-manual_3736853115.webp)
110
Explosion Proof Network IP Camera User Manual
image to the surveillance center when a VCA alarm occurs.
Picture Quality:
High, Medium and Low are selectable.
Picture Resolution:
CIF, 4CIF, 720P, and 1080P are selectable.
Camera Calibration
Perform the following steps to three-dimensionally measure and quantize the image
from the camera, and then calculate the size of every target. The VCA detection will
be more accurate if the camera calibration is configured.
Steps:
1.
Check the checkbox of
Camera Calibration
to enable this function.
2.
Select the calibration mode as Input Basic Data or Draw on Live View Video.
Input Basic Data
: Input the mounting height, viewing angle, and horizon
ratio of the camera manually.
Draw on Live View Video
: Click
Draw Verification Line (Horizontal) /
(Vertical)
to draw a horizontal/vertical line in the live view, and input the
actual length in Real Length field. With the drawn reference lines and their
real length, the camera can conclude other objects appear in the live view.
3.
(Optional) Check the checkbox of
Enable Verification of Camera
Calibration
, click the
Horizontal Verify / Vertical Verify
button to draw a
horizontal / vertical line on the live video, and then click the
Calibrate
button
to calculate the line length. Compare the calculated line length to the actual
length to verify the calibration information you set.
4.
You can click
Delete
to delete the drawn lines.
5.
Click
Save
to save the settings.
Note:
If the live view is stopped, the camera calibration is invalid.
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...