![background image](http://html1.mh-extra.com/html/larson-electronics/atex-expcmr-ip-poe-2mpir-108d/atex-expcmr-ip-poe-2mpir-108d_quick-installation-manual_3736853059.webp)
55
Explosion Proof Network IP Camera User Manual
5.
Click
Save
to finish the settings.
Note:
A reboot is required for the settings to take effect.
6.3.7
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1.
Enter the QoS Settings interface:
Configuration >Advanced Configuration > Network > QoS
Figure 6-16 QoS Settings
2.
Configure the QoS settings, including video / audio DSCP, event / alarm DSCP
and Management DSCP.
The valid value range of the DSCP is 0-63. The bigger the DSCP value is, the
higher the priority is.
Note:
DSCP refers to the Differentiated Service Code Point; and the DSCP value
is used in the IP header to indicate the priority of the data.
3.
Click
Save
to save the settings.
Note:
A reboot is required for the settings to take effect.
6.3.8
Configuring UPnP™ Settings
Universal Plug and Play (UPnP™) is a networking architecture that provides
compatibility among networking equipment, software and other hardware devices.
The UPnP protocol allows devices to connect seamlessly and to simplify the
implementation of networks in the home and corporate environments.
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...