47
Explosion Proof Network IP Camera User Manual
ranges from 1024 to 65535.
HTTPS Port:
The default port number is 443, and it can be changed to any port
No. which is not occupied.
Server Port:
The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
3.
Click
Save
to save the settings.
Note:
A reboot is required for the settings to take effect.
6.3.3
Configuring PPPoE Settings
Steps:
1.
Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
Figure 6-8 PPPoE Settings
2.
Check the
Enable PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4.
Click
Save
to save and exit the interface.
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...