60
Explosion Proof Network IP Camera User Manual
set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred
DNS Server.
Note:
Please refer to
Section 6.3.1 Configuring TCP/IP Settings
for detailed
information.
2.
Enter the Email Settings interface:
Configuration > Advanced Configuration > Network > Email
Figure 6-22 Email Settings
3.
Configure the following settings:
Sender:
The name of the email sender.
Sender’s Address:
The email address of the sender.
SMTP Server:
The SMTP Server IP address or host name (e.g.,
smtp.263xmail.com).
SMTP Port:
The SMTP port. The default TCP/IP port for SMTP is 25 (not
secured). And the SSL SMTP port is 465.
Enable SSL:
Check the checkbox to enable SSL if it is required by the SMTP
server.
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...