![background image](http://html1.mh-extra.com/html/larson-electronics/atex-expcmr-ip-poe-2mpir-108d/atex-expcmr-ip-poe-2mpir-108d_quick-installation-manual_3736853103.webp)
98
Explosion Proof Network IP Camera User Manual
Figure 6-60 Configuring Scene Change Detection
6.6.10
Configuring Face Detection
Purpose:
Face detection function detects the face appears in the surveillance scene, and some
certain actions can be taken when the alarm is triggered.
Note:
Face detection function varies according to different camera models.
Steps:
1.
Enter the Face Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Face Detection
2.
Check the checkbox of
Enable Face Detection
to enable the function.
3.
(Optional) Check the checkbox of
Enable Dynamic Analysis for Face
Detection
, and then the detected face is marked with green rectangle on the live
video.
Note:
To mark the detected face on the live video, go to Local Configuration>
Live View Parameters and enable the Rules.
4.
Click-and-drag the slider to set the detection sensitivity.
Sensitivity:
Range [1-5]. The higher the value is, the more easily the face can be
detected.
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...