123
Explosion Proof Network IP Camera User Manual
Steps:
1.
Enter the People Counting Configuration interface:
Configuration > Advanced Configuration > People Counting
2.
Select
People Counting Configuration
tab to set the detailed parameters.
Figure 6-76 People Counting Configuration
3.
Check the checkbox of
Enable People Counting
to enable the function.
4.
(Optional) Check the checkbox of
Enable OSD Overlay
, and the real-time
number of people entered and exited is displayed on the live video.
5.
Set the detection line.
An orange line, called detection line can be set on the live video, and the
people entering or exiting through the line will be detected and counted.
1)
Click
Draw Line
, and an orange detection line will appear on the image.
2)
Click-and-drag the detection line to adjust its position.
3)
Click-and-drag the two end points of the detection line to adjust its length.
4)
To delete the detection line, click the
Delete Line
button.
Note:
The detection line should cover the whole entrance / exit.
6.
An arrow indicating the entering direction of people is shown after the
Summary of Contents for ATEX-EXPCMR-IP-POE-2MPIR-108D
Page 9: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 57: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 148: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 167: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...
