Larson Davis Spartan 730 Reference Manual Download Page 85

Page: 85 / 101

Spartan 730/730IS Dosimeter Manual

A-15

The Spartan 730 dosimeter complies with ANSI S1.25-2007 as specified below.

A.2.4 FCC/IC Compliance

Contains

FCC ID: 2AA9B04

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must

accept any interference received, including interference that may cause undesired operation.

Contains

IC: 12208A-04

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur

de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

onctionnement.

Class Designation

Class 2 with variable A or C frequency weighting, variable for F or S time constant,

variable Criterion Level, Threshold, and Exchange Rate.

Upper Limit Indicator

Overload is indicated when the upper limit has been exceeded and held for 4

seconds.

Operating Range

See

SLM Performance on page A-8

Pulse Range

88 dB

Microphone Frequency

Response

The frequency response is listed in section A.2.1 Microphone, Frequency Response,

and illustrated graphically in section

A.1 Instrument Specifications

Maximum Safe SPL

143 dB peak

Sensitivity to Magnetic Field

No sensitivity detected at 80A/m

Temperature and Humidity

Range

See

Environmental Conditions on page A-5

. This also applies to storage

conditions.

Calibration Procedure

See

2.6.1 Calibrating Your Spartan Dosimeter on page 26

Mounting on Wearer

See

Deploying the Dosimeter on page 4-53

Test Points

The means to insert electrical signals is provided by using the ADP106 (Adapter

input BNC to 1/4-inch Mic 12 pF) The electrical impedance of the source connected

to the ADP106 shall be 600

or less.

Maximum Linear Peak Level

140 dB peak

Recalibration Period

1 year

Summary of Contents for Spartan 730






































































































Search results

Summary of Contents for Spartan 730

Reviews:

Brands by name

Popular brands

Larson Davis Spartan 730, Reference Manual

Search results

Summary of Contents for Spartan 730

Reviews:

Brands by name

Popular brands