Lantronix 100-120 VAC SLB User Manual Download Page 64

Page: 64 / 344

6: Basic Parameters

SLB™ Branch Office Manager User Guide

Advanced Cellular Gateway Configuration

Fail-Over Cellular Gateway Firmware

Note:

The Sierra fail-over device must be selected in order for you to be able to update

the firmware.

Load Cellular Gateway Firmware Options

3. To save your entries, click the

Apply

button.

Apply

makes the changes immediately and

saves them so they will be there when the SLB branch office manager is rebooted.

Ethernet Counters

The

Network > Network Settings (bottom of page)

page displays statistics for each of the SLB's

Ethernet ports since boot-up. The system automatically updates them.

Note:

For Ethernet statistics for a smaller time period, use the

diag perfstat

command.

Network Commands

Go to

Network Commands (on page 307)

to view CLI commands which correspond to the web

page entries described above.

PIN Lock (check box) For the Sierra gateways, enable a lock so that the SIM card used by the gateway

cannot be used by anyone who does not have the PIN.

Pin # for SIM Card/

Retype

For the Sierra gateways, the PIN number for the SIM card used by the gateway.

May have up to 8 characters.

SIM PUK/Retype

The Sierra gateway does not have this feature.

Update Firmware

(check box)

Select this option to update firmware on the Sierra gateway. The

Functional

Firmware file

and the

Radio Firmware file

will be transferred to the SLB using the

method selected by the

Load Firmware via

option. Once the files have been

transferred to the SLB, the SLB will initiate the firmware update on the Sierra

gateway.

Firmware Filename

Enter the name of the firmware filename exactly as it is represented.

Radio Firmware

Filename

Enter the name of the radio firmware filename exactly as it is represented.

Load Firmware via

Select the method to load the firmware from the options in the drop-down menu.

FTP/SFTP/SCP

Server

Enter the server address from where to load the firmware.

Path

Enter the server directory pathway to the files.

Enter the user login for the FTP/SFTP/SCP server to verify access rights to load

new firmware.

Password/Retype

Password

Enter the password for the FTP/SFTP/SCP server to verify access rights to load

new firmware. Retype the password in the

Retype Password

field.

Summary of Contents for 100-120 VAC SLB

























































































































































































































































































































































Search results

Summary of Contents for 100-120 VAC SLB

Reviews:

Lantronix 100-120 VAC SLB, User Manual, Page: 64 / 344

Search results

Summary of Contents for 100-120 VAC SLB

Reviews: