8: Device Ports
SLB™ Branch Office Manager User Guide
118
Modem Settings: Text Mode
Modem Settings: PPP Mode
Initialization Script
Commands sent to configure the modem may have up to 100 characters. Consult
your modem’s documentation for recommended initialization options. If you do
not specify an initialization script, the SLB branch office manager uses a default
initialization string of
AT S7=45 SO=0 L1 V1 X4 &D2 &c1 E1 Q0
.
Note:
We recommend that the modem initialization script always be preceded
with
AT
and include
E1 V1 x4 Q0
so that the SLB unit may properly control
the modem. For information on AT commands, refer to the modem user guide, or
do a web search for
at command set
.
Modem Timeout
Timeout for all modem connections. Select
Yes
(default) for the SLB branch office
manager to terminate the connection if no traffic is received during the configured
idle time. Enter a value of from 1 to 9999 seconds. The default is 30 seconds.
Caller ID Logging
Select to enable the SLB branch office manager to log caller IDs on incoming
calls. Disabled by default.
Note:
For the Caller ID
AT
command, refer to the modem user guide.
Modem Command
Modem
AT
command used to initiate caller ID logging by the modem.
Note:
For the
AT
command, refer to the modem user guide.
Dial-back Number
Users with dial-back access can dial into the SLB unit and enter their login and
password. Once the SLB authenticates them, the modem hangs up and dials
them back.
Select the phone number the modem dials back on -a fixed number or a number
associated with their login. If you select
Fixed Number
, enter the number (in the
format 2123456789).
The dial-back number is also used for CBCP client as the number for a user-
Device Ports - Settings (on page 113)
for more information.
Dial-back Delay
For dial-back and CBCP Server, the number of seconds between the dial-in and
dial-out portions of the dialing sequence.
Dial-back Retries
For dial-back and CBCP Server, the number of times the SLB device will retry the
dial-out portion of the dialing sequence if the first attempt to dial-out fails.
Timeout Logins
If you selected
Text
mode, you can enable logins to time out after the connection is
inactive for a specified number of minutes. The default is
No
. This setting is only
applicable for text mode connections.
PPP
mode connections stay connected until
either side drops the connection. Disabled by default.
Dial-in Host List
From the drop-down list, select the desired host list. The host list is a prioritized list
of SSH, Telnet, and TCP hosts that are available for establishing outgoing modem
connections or for
connect direct
at the CLI. The hosts in the list are cycled
through until the SLB branch office manager successfully connects to one.
To establish and configure host lists, click the
Host Lists
link.
Negotiate IP Address
If the SLB unit and/or the serial device have dynamic IP addresses (e.g., IP
addresses assigned by a DHCP server), select
Yes
.
Yes
is the default.
If the SLB device or the modem have fixed IP addresses, select
No
, and enter
the
Local IP
(IP address of the port) and
Remote IP
(IP address of the
modem).
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...