4: Quick Setup
SLB™ Branch Office Manager User Guide
50
After you complete the Quick Setup script, the changes take effect immediately.
Figure 4-7 Completed Quick Setup
Quick Setup will now step you through configuring a few basic settings.
The current settings are shown in brackets ('[]').
You can accept the current setting for each question by pressing
<return>.
____Ethernet Port and Default Gateway___________________________________
The SLB88 has two ethernet ports, Eth1 and Eth2.
By default, both ports are configured for DHCP.
Configure Eth1: (1) obtain IP Address from DHCP
(2) obtain IP Address from BOOTP
(3) static IP Address
Enter 1-3: [1]
The SLB88 can be configured to use a default gateway.
IP Address (if
specifying)
An IP address that is unique and valid on your network and in the same subnet as
your PC. There is no default.
If you selected
DHCP
or
BOOTP
, this prompt does not display.
Enter all IP addresses in dot-quad notation. Do not use leading zeros in the fields for
dot-quad numbers less than 100. For example, if your IP address is 172.19.201.28,
do not enter 028 for the last segment.
Note:
Configurations with the same IP subnet on multiple interfaces (Ethernet or
PPP) are not currently supported.
Subnet Mask
The subnet mask specifies the network segment on which the SLB branch office
manager resides. There is no default. If you selected DHCP or BOOTP, this prompt
does not display.
Default Gateway
IP address of the router for this network. There is no default.
Hostname
The default host name is slbXXXX, where XXXX is the last 4 characters of the
hardware address of Ethernet Port 1. There is a 64-character limit (contiguous
characters, no spaces).
Note:
The host name becomes the prompt in the command line interface.
Domain
If desired, specify a domain name (for example, support.lantronix.com). The domain
name is used for host name resolution within the SLB. For example, if
abcd
is
specified for the SMTP server, and
mydomain.com
is specified for the domain, if
abcd
cannot be resolved, the SLB branch office manager attempts to resolve
abcd.mydomain.com
for the SMTP server.
Time Zone
If the time zone displayed is incorrect, enter the correct time zone and press
Enter
. If
the entry is not a valid time zone, the system guides you through selecting a time
zone. A list of valid regions and countries displays. At the prompts, enter the correct
region and country.
Date/Time
If the date and time displayed are correct, type
n
and continue. If the date and time
are incorrect, type
y
and enter the correct date and time in the formats shown at the
prompts.
Sysadmin
password
Enter a new sysadmin password.
CLI Quick Setup
Settings
Description
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...