11: User Authentication
SLB™ Branch Office Manager User Guide
216
3. Select or clear the checkboxes for the following rights:
4. Click the
Add Group
button.
To view or update a group:
1. In the
Groups
table, select the group and click the
View Group
button. The group attributes
and permissions will be displayed in the lower section of the page.
2. Modify the group attributes and permissions and click the
Edit Group
button.
Escape Sequence
A single character or a two-character sequence that causes the SLB
branch office manager to leave direct (interactive) mode. (To leave listen
mode, press any key.)
A suggested value is
Esc+A
(escape key, then uppercase "A" performed
quickly but not simultaneously). You would specify this value as
\x1bA
,
which is hexadecimal
(\x)
character 27
(1B)
followed by an
A
.
This setting allows the user to terminate the
connect direct
command on the command line interface when the endpoint of the
command is
deviceport
,
tcp
, or
udp
.
Break Sequence
A series of one to ten characters users can enter on the command line
interface to send a break signal to the external device. A suggested
value is
Esc+B
(escape key, then uppercase “B” performed quickly but
not simultaneously). You would specify this value as
\x1bB
, which is
hexadecimal
(\x)
character 27
(1B)
followed by a
B
.
Custom Menu
If custom menus have been created you can assign a default custom
menu to the group. See
Display Menu at Login
Check the checkbox to display the menu at login.
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter network settings.
Services
Right to enable and disable system logging, SSH and Telnet logins,
SNMP, and SMTP.
Secure Lantronix
Network
Right to view and manage secure Lantronix units (e.g., SLP, Spider, and
SLB units) on the local subnet.
Date/Time
Right to set the date and time.
Local Users
Right to add or delete local users on the system.
Remote Authentication
Right to assign a remote user to a user group and assign a set of rights
to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create or edit a custom user menu for the CLI.
Web Access
Right to access Web-Manager.
Diagnostics & Reports
Right to obtain diagnostic information and reports about the unit.
Reboot & Shutdown
Right to use the CLI or shut down the SLB unit and then reboot it.
Firmware & Configuration
Right to upgrade the firmware on the unit and save or restore a
configuration (all settings).
Device Port Operations
Right to enter control device ports.
Device Port Configuration
Right to enter device port settings.
USB
Right to enter modem settings for USB devices.
Power Outlets
Right to view and enter settings for power outlets (SLB unit only).
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...