Lanier AP2145 Setup Manual Download

Page: 75 / 424

1. Setting Up the Printer Driver

and Canceling a Print Job

PCL 6/5e - Accessing the Printer Properties

Windows 95/98/Me - Accessing the Printer Properties

Changing the default printer settings

AAAA

Click

[

Start

]

on the taskbar, point to

[

Settings

]

, and then click

[

Printers

]

The

[

Printers

]

window appears.

BBBB

Click to select the icon of the printer whose default settings you want to
change.

CCCC

On the

[

File

]

menu, click

[

Properties

]

The Printer Properties appear.

DDDD

Make any settings you require, and then click

[

]

Note

❒

With some applications, the printer driver's settings are not used, and the
application's own default settings are applied.

Making printer settings from an application

To make the printer settings for a specific application, open the

[

Printer Properties

]

dialog box from that application. The following example describes how to make
settings for the WordPad application that comes with Windows 95/98/Me.

Note

❒

The actual procedure you should follow to open the

[

Printer Properties

]

dialog

box may differ depending on the application. For more information, see the
documentation that comes with the application you are using.

❒

Any settings you make in the following procedure are valid for the current
application only.

AAAA

On the

[

File

]

menu, click

[

Print

]

The

[

Print

]

dialog box appears.

BBBB

Select the printer you want to use in the

[

Name

]

list box, and then click

[

Properties

]

The Printer Properties appear.

CCCC

Make any settings you require, and then click

[

]

DDDD

Click

[

]

to start printing.

Summary of Contents for AP2145





































































































































































































































































































































































































































Search results

Summary of Contents for AP2145

Reviews:

Related manuals for AP2145

Brands by name

Popular brands

Lanier AP2145, Setup Manual

Search results

Summary of Contents for AP2145

Reviews:

Related manuals for AP2145

Brands by name

Popular brands