manualshive.com logo in svg

Landis+Gyr E230, User Manual

Share
Download
Landis+Gyr E230 User Manual Download Page 79

Decommissioning and disposal 

      79/84 

D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual 

© Gyr 

9 

Decommissioning and disposal 

 

The procedure for the safe removal of the meter from the installation is 
described in 

7.4

. Please ensure that 

ALL SAFETY PRECAUTIONS

 are 

met before proceeding. 

 

The components used to manufacture the device can, in the main, be 
broken down into constituent parts and sent to an appropriate recycling 
or disposal facility. When the product is removed from use, the whole 
product must be sent to a professional electronic waste treatment 
process. The waste treatment and disposal plants must be approved by 
local regulatory authorities. 

The end processing of the product and recycling of its components must 
always be carried out in accordance with the rules and regulations of the 
country where the end processing and recycling are done. 

On request, Gyr will provide more information about the 
environmental impact of the product. 

 

 

This product must not be disposed of in regular waste. Use a 
professional electronic waste treatment process. 

 

 

The following are general guidelines and should NOT take precedence 
over local environmental laws and policies, which should be adhered to 
without compromise. 

 

Component parts  

Disposal  

Printed circuit boards  

Delivered to recycling plants 

Metal components  

Sorted and delivered to metal recycling 
plants 

Plastic components  

Sorted and delivered to re-granulation if at 
all possible  

Batteries 

Removed from meter and delivered to 
specialised recycling plants 

 

Summary of Contents for E230





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands