Landis+Gyr E230 User Manual Download Page 2

Page: 2 / 84

2/84

Revision history

D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual

Revision history

Version Date

Comments

30.06.2012

Combined User Manuals D000028872 E230 ZxR100xC (version e,
issue 1.32) and D000030166 E230 ZMR100xR (version e, issue
1.32).
Section

2.4.7 Temperature values

: Corrected maximum storage

temperature (+70°C).
Section

4.1.1 Meter construction

: Added extra extended terminal

cover.
Section

6.6.1 Tariff control (ZMR100xR only)

: Deleted Status signal.

Section

6.9.1 Manual setting of date/time/ID

: Added Id2.1 and Id2.2.

Section

6.15 IEC formatted commands

: Updated command list.

Figure 13. Drilling diagram for fixing screws

: Added 180 mm short

fixing.
Changed company name from “Gyr (Europe AG) to
“Gyr AG”.
Other minor formatting and wording changes.

30.6.2012

Minor formatting changes.

25.07.2012

Corrected pulse output standard (IEC 62053-31).

d 17.08.2012

Section

2.4.10 Output values

: Deleted “no measurement of load

curve” from the description of pulse output r53.

e 11.02.2013

Section

1 About this document

: second restriction added.

Section

2.1 Functional overview

: measuring technology updated and

RS485 interface added.
Section

2.3.2 E230 ZMR1x0AR/CR

: RS485 interface added.

Section

2.4.6 Power consumption

: power consumption data corrected.

Section

2.4.10 Output values

: RS485 interface added.

Section

3.1 Safety information

: safety concept updated and all notes,

cautions and warnings reformatted.
Section

4.2.5 Multi-tariff version with one pulse input, one relay output

and RS485 interface

: new diagram added.

Section

4.2.6 Multi-tariff version with four pulse inputs and RS485

interface

: new diagram added.

Section

6.1 Customer display

: figures redrawn and rate indication

triangles added to list.
Section

6.1.1 Display cycle options

: previous billing added.

Section

6.1.2 Example displays

: RST replaced by L1, L2 and L3.

OBIS codes for summation, DC field, terminal tamper and meter case
tamper added.
Section

6.1.4 Meter powered with zero energy being consumed (anti-

creep mode)

: expanded information about energy direction and phase

indicators.
Section

6.1.6 Rate registers

: advanced Rate and Relay indication

mode added.
Section

6.3 Push button operation

: using the MD button to reset

alarms added.
Section

6.4.6 Alert notification

: alert notification lists added.

Section

6.5 No power read (optional fitting)

: inductive loop deleted.

Section

6.7.4 Reset of maximum demand

: MD register reset

procedure updated.
Section

6.8 Billing (stored values) (ZMR100xR only)

: new section

added.
Section

6.8.1 Unit suppression

: new section added.

Summary of Contents for E230





















































































Search results

Summary of Contents for E230

Reviews:

Brands by name

Popular brands

Landis+Gyr E230, User Manual

Search results

Summary of Contents for E230

Reviews:

Brands by name

Popular brands