Upright Bike Assembly
30
5. Lower plastic tube finishing cover, attached to upright tube,
into place (Figure 3-3). Secure with (2) #21 Phillip cross
head screws. Do not over tighten.
Figure 3-3. Upright Tube Finishing Cover Installation
6. Locate front and rear console/upright tube finishing covers
in the accessory box.
7. Install rear console cover first. Secure to upright tube
mounting plate with (2) #28 crosshead screws. (Figure 3-4).
Figure 3-4. Console Rear Finishing Cover Installation
cross head
screws (2x)
Cross head
screws (2x)
Rear Cover
