Recumbent Bike Assembly
24
10. With rear cover in place, position front cover so both plastic
mounting inserts go through the cross bar access holes.
Secure with (2) #25 cross head screws. Do not over tighten
or plastic components may be damaged (Figure 2-6).
Figure 2-6. Console Front Finishing Cover Installation
11. Locate the metal tube seatback frame in the accessory box.
Attach to base using (4) #26 M10 x 25 hex head bolts and
(4) #21 spring washers (Figure 2-7). Fully tighten hardware.
Figure 2-7. Seat Back Installation
cross head
screws
(2x)
Rear
Cover
Front
Cover
M10 x 25 hex
head bolts and
spring washers
(4x)
