19
2. Recumbent Bike Assembly
2.1.
Tools Needed
The Landice recumbent bike is shipped with tools and
hardware necessary for assembly and installation. A sharp
utility knife and/or diagonal cutters will aid in removing plastic
strapping.
• 13-16 mm open end combination wrench
• Cross head #2 (Phillips) screwdriver
• #8 Hex key wrench
• #6 Hex key wrench
• #5 Hex key wrench
• #4 Hex key wrench
• Optional: 5/8 inch open end or adjustable wrench for leveling
bike if necessary (not included)
2.2.
Unpacking
Unpacking and installation of the bike should be done by a
qualified technician. The packaged bike is heavy and weighs
290 lb (132 kg).
WARNING
To avoid injury, use caution when moving
and lifting the bike during unpacking and
assembly. Two people are recommended
when removing bike base from shipping
pallet.
AVERTISSEMENT
Pour éviter toute blessure, faites attention
lors du déplacement et du levage du vélo
lors du déballage et de l'assemblage. Deux
personnes sont recommandé lors du retrait
socle de vélo de la palette d'expédition.
CAUTION
Be careful! Straps are under tension.
ATTENTION
Faites attention! Les sangles sont sous
tension.
