Recumbent Bike Assembly
22
5. Carefully remove the display console from its box.
6. Connect both power harnesses within the upright tube to
the matching harnesses located at the bottom of the display
console (Figure 2-3).
Note:
Connectors are keyed, do not force connectors together or
damage may result.
Figure 2-3. Console Harness Connectors
7. Rotate console upward, while carefully routing wire
connections into base tube and/or console (Figure 2-4).
Align pins with holes in flange, then secure console using
(4) #27 M6x20 flat head cap screws.
CAUTION
Use care if using a knife to open console
box to prevent damage to console.
ATTENTION
Faites attention si vous utilisez un
couteau pour ouvrir le boîtier de la
console afin d'éviter d'endommager la
console.
