Recumbent Bike Assembly
26
13. Locate the vented seatback pad from the accessory box,
secure to seatback frame with (4) M8 x 20 button head bolt
#28 and (4) flat washers #29. When secured, insert back
pad finishing covers #30 as shown (Figure 2-10).
Figure 2-10. Seat Back Pad Installation
14. Prior to use, verify there is no remaining hardware within
the hardware kit and all hardware is properly tightened.
15. If the bike is positioned on an unlevel surface, adjust each
foot pedestal using a 5/8 inch open end or adjustable
wrench (not provided).
16. Your bike is now ready for use.
M8 x 20 button head bolt
and washer (4 places)
Finishing Covers
(4 places)