manualshive.com logo in svg

Lake Shore Cryotronics F41, User Manual

Share
Download
Lake Shore Cryotronics F41 User Manual Download Page 68

60

 

c

HAPTER

 4: 

Computer Interface Operation

F71/F41 Teslameter

4.4.1.3 Installing the USB Driver

The USB driver is available through Windows® Update. This is the recommended 
method for installing the driver, as it will ensure that you always have the latest ver-
sion of the driver installed. If you are unable to install the driver from Windows® 
Update, refer to section 4.4.1.3.2 to install the driver from the web.

 

These procedures 

assume that you are logged into a user account that has administrator privileges.

4.4.1.3.1  Installing the Driver from Windows® Update

 1. Connect the USB cable from the teslameter to the computer.
 2. Turn on the teslameter source.
 3. When the Found New Hardware wizard appears, select 

Locate and install driver 

software (recommended)

.

 4. The Found New Hardware wizard should automatically connect to Windows® 

Update and install the drivers. 

 5. When the Found New Hardware wizard finishes installing the driver, a confirma-

tion message stating “the software for this device has been successfully 
installed” will appear. Click 

Close

 to complete the installation.

4.4.1.3.2  Installing the Driver from the Web

The USB driver is available on the Lake Shore website. To install the driver, it must be 
downloaded from the website and extracted. Use the procedures below to download, 
extract, and install the driver using Windows®.

Download the driver:

 1. Locate the USB driver on 

https://www.lakeshore.com/software

.

 2. Right-click on the USB driver download link, and select 

Save as

.

 3. Save the driver to a convenient place, and take note where the driver was down-

loaded.

Extract the driver:

The downloaded driver is in a ZIP compressed archive. The driver must be extracted 
from this file. Windows® provides built-in support for ZIP archives. If this support is 
disabled, a third-party application, such as WinZip™ or 7-Zip, must be used.
 1. Right-click on the file and click 

extract all.

 2. An Extract Compressed (Zipped) Folders dialog box will appear. It is recom-

mended the default folder is not changed. Take note of this folder location.

 3. Click to clear the 

Show extracted files when complete

 checkbox, and click 

Extract

.

Manually install the driver:

The following section describes how to manually install the driver using Windows®. To 
install the driver, you must be logged into a user account that has administrator privi-
leges.
 1. Connect the USB cable from the teslameter to the computer.
 2. Turn on the teslameter source.
 3. If the Found New Hardware wizard appears, click 

Ask me again later

.

 4. Open Device Manager. Use this procedure to open Device Manager.

a.      Click the Windows® 

Start

 button and type Device Manager in the 

Start Search

 box.

b.      Click on the Device Manager link in the Search Results Under Programs dia-

log box.

c.      If User Account Control is enabled click 

Continue

 on the User Account Control 

prompt.

 5. Click 

View

 and ensure the 

Devices by Type

 check box is selected.

Summary of Contents for F41


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands