manualshive.com logo in svg

Lake Shore Cryotronics F41, User Manual

Share
Download
Lake Shore Cryotronics F41 User Manual Download Page 56

48

 

c

HAPTER

 3: 

Operation

F71/F41 Teslameter

3.6.4.2.2  Axial

A positive field value will be reported when the magnetic field direction is in the stem 
toward the handle or mounting block.

3.6.4.2.3  

3-Axis

With three different axes, identifying field direction and polarity is much more diffi-
cult than single-axis probes. In this situation, the handle will be less useful that look-
ing directly at the stem tip where active area location and axis labels are laser 
engraved. 

D

X-axis: 

positive field reading when field passes through the probe from the side 

marked with X to the side without an X.

D

Y-axis: 

positive field reading when field passes through the probe from the side 

marked with Y to the side without a Y.

D

Z-axis:

 positive field reading when field is directed into the probe stem.

FIGURE 3-53 

Axial polarity

FIGURE 3-54 

3-Axis polarity

Summary of Contents for F41


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands