Lake Shore Cryotronics 121 User Manual Download

Page: 51 / 62

6.8 Firmware Updates

This section provides instructions on updating your firmware. It also pro-
vides a table of the updates that have been made thus far.

6.8.1 Updating the Firmware

Periodically, Lake Shore provides updates to instrument firmware. The
files for these updates can be downloaded from our website. To access
the firmware updates, follow this procedure.

1. Go to 121 website page (http://www.lakeshore.com/products/DC-

Current-Sources/Model-121-DC-Current-Source/Pages/Over-
view.aspx) to download the instrument firmware.

2. Enter your name and email address so that we can keep you updated

on any new firmware for your instrument.

3. Click the “Go to the download” bar and follow the prompts that are

provided on the screen for you.

6.8.2 Record of Updates Made to the Firmware

1.0 initial release.
1.1 minor bug fixes
1.2 minor bug fixes
1.3 added Power Up Enable feature

FIGURE 6-3

Power supply connector

Pin

Description

Inner conductor

+5 V

Outer conductor

Ground

TABLE 6-5

Power supply pin and

connector details

Summary of Contents for 121































































Search results

Summary of Contents for 121

Reviews:

Related manuals for 121

Brands by name

Popular brands

Lake Shore Cryotronics 121, User Manual

Search results

Summary of Contents for 121

Reviews:

Related manuals for 121

Brands by name

Popular brands