Lake Shore Cryotronics 121 Page 35 User Manual Download | Manualshive

Page: 35 / 62

background image

25

Lake Shore Model 121, it might be displayed as USB Device. If nei-
ther are displayed, click Action and then Scan for hardware changes,
which may open the Found New Hardware wizard automatically. If
the Found New Hardware wizard opens, click

Cancel

.

7. Right-click on Lake Shore Model 121 and click Update Driver Soft-

ware.

8. Click Browse my computer for driver software.
9. Click Browse and select the location of the extracted driver.
10. Ensure the

Include subfolders

check box is selected and click

Next

.

11. When the driver finishes installing a confirmation message stating

"Windows has successfully updated your driver software" should
appear.

12. Click

Close

to complete the installation.

For Windows® XP:
1. Connect the USB cable from the Model 121 to the computer.
2. Turn on the Model 121.
3. The Found New Hardware wizard should appear. If the Found New

Hardware wizard does not appear, the following procedure can be
used to open the Hardware Update wizard which can be used
instead:

a. Open Device Manager. Use this procedure to open the Device

Manager:

D

Right-click on

My Computer

and then click

Properties

.

This will open the System Properties dialog.

D

Click the

Hardware

tab and then click

Device Manager

.

b. Click

View

and ensure the

Devices by Type

check box is selected.

c. In the main window of Device Manager, locate the

Ports

(COM &

LPT) device type. In many instances this will be between the Net-
work adapters and Processors items. If the

Ports

(COM & LPT)

item is not already expanded, click the + icon. Lake Shore Model
121 should appear indented underneath Ports (COM & LPT). If it
is not displayed as Lake Shore Model 121, it might be displayed
as USB Device. If neither are displayed, click

Action

and then

select

Scan

for hardware changes, which may open the Found

New Hardware wizard automatically. If the Found New Hard-
ware wizard opens, continue to step 4.

d. Right-click on Lake Shore Model 121 and click

Update Driver

.

4. Select

No, not at this time

and click

Next

.

«
...
33
34
35
36
37
...
»

Summary of Contents for 121































































Reviews:

No comments

Related manuals for 121

Brand: Lambda Pages: 25

Brand: Gallagher Pages: 96

ASCM18QM Series

Brand: Fein Pages: 20

Brand: Jet Pages: 20

Brand: Jet Pages: 28

Brand: National Instruments Pages: 30

Brand: Q-tran Pages: 5

Brand: TE Connectivity Pages: 8

Brand: S.E.F.A Pages: 26

Brand: Hakko Electronics Pages: 2

Brand: Energenie Pages: 45

Brand: Amazing Machinery Pages: 29

Brand: Enerpac Pages: 16

Brand: Elektro-Automatik Pages: 4

Brand: Fein Pages: 113

Brand: Parkside Pages: 53

Brand: Tripp Lite Pages: 3

Brand: PASCO Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands