laguna MTSAW17536110-0130, Manual

Page: 8 / 35

7
SAFETY SWITCH
The table saw is equipped with a push-button
switch that will accept a safety padlock (not
included). See Fig. 1. To safeguard your
machine from unauthorized operation and
accidental starting by young children, the use
of a padlock is required.
p: With a screw driver, push a solvent-saturated rag o
T-slots to remove the grease.
UNPACKING
This table saw is very heavy. Get lifting help or
use power lifting equipment such as a forklift
to move this Table Saw.
CLEAR UP
The protective coating on the saw table
prevents rust from forming during shipping and
storage. Remove it by rubbing with a rag
dipped in kerosene, mineral spirits or paint
thinner. (Dispose of potentially flammable
solvent- soaked rags according to
manufacturer’s safety recommendations.)
A putty knife, held flat to avoid scratching the
surface, may also be used to scrape off the
coating followed by clean-up with solvent.
Avoid rubbing the saw’s painted surfaces, as
many solvent-based products will remove
paint Fig. 2.
To prevent rust, apply a light coating of paste
wax or use regular applications of any
after-market surface protected or rust inhibitor.
PLACEMENT THE TABLW SAW
This machine should be installed and
operated only on a solid, flat and stable floor
that is able to support the weight of the saw
(312 lbs-142 kgs).
Using the dimensions shown as a
guideline, plan for placement within your
shop that will allow the operator to work
unencumbered and unobstructed by foot
traffic or other tools or machinery.
Fig. 1
Fig. 2
With a screw driver,
push a solvent-saturated
rag into the T-slots to
remove the grease.