D
RAWINGS
OF
THE
R
APIDS
™
LT0033-3
Ref. # Description
Function
1
Housing
Cover
Houses the touchscreen display
and protects the mechanical
components of the unit.
2
Cartridge
Cover
Attached by magnets, it covers
the installed cartridges.
5
Touchscreen
Display
Screen that allows a user to op-
erate the Rapids™ unit.
6a
Dispense
Hose Fitting
Water will dispense from this
fitting. If the optional final filter
is used, 6b, the fitting will be
replaced by the final filter, 6b.
7
Air Filter
The air filter attaches here and
filter the incoming air.
8
Power Switch
Toggle the switch up or down
will turn the unit on or off.
9
Power Source
Connector
Connection point for the power
cord and the unit.
10
Water Input
Connector
Connection point for the tubing
from the water source to the
unit.
11
Metal Rods
Rods function as a hinge for
attaching the cartridge cover to
the unit. The bottom of the
cover is secured with magnets.
13
Fittings
Fittings connect the tubes to
the cartridges. There are four
fittings on top and bottom of
the cartridges.
14
Ultra Pure
Fitting
Far left fitting is considered an
ultra pure fitting. Water running
through this fitting is
16
NFC Tag
Reader
Scans information from the NFC
(Near-Field Communication) tags
on the cartridges and relays it to
the control board.
26
Display
Connector
Connects the unit to the display
board on the housing cover.
2
1
5
7
8
9
10
11
13
7
16
26
6a
6a
Page 19
Figure 2.14
Figure 2.15
Figure 2.16
Table 2.17
14