background image

LabStrong™ Cop. 

NOTICE  

 
LabStrong™ Corp. shall not be liable for any damages arising out of or related to the incorrect installation or 
operation of the unit.  LabStrong™ shall have no liability to you or any other person or entity for indirect, spe-
cial, incidental or consequential damages of any description, whether arising out of warranty or other con-
tract, negligence or other tort, or otherwise.  
 
The Rapids™ Type I Water Purification System is designed to provide ultrapure water that meets ASTM Type I 
specifications, provided it is fed with water that meets certain quality specifications and is properly main-
tained as recommended by LabStrong™ 
 
LabStrong™ does not warrant the Rapids™ for any specific application.  The end user must evaluate and de-
cide if the water produced is to the standards needed for their purposes and procedures. LabStrong™ is not 
responsible for any results obtained due to usage of water produced by the Rapids™ Type I Water Purification 
System.  
 
LabStrong™ reserves the right to change/update the information in this manual at anytime.  This manual 
should not be construed as a commitment by LabStrong™. This manual is believed to be complete and accu-
rate at the time of publication and LabStrong™ assumes no responsibility for any errors that might appear in 
this document.  LabStrong™ makes no representation or warranty to you of any kind, express or implied, with 
respect to installation, use, maintenance, or replacement of products as described in this manual.  Lab-
Strong™ fully disclaims all express and implied warranties, whether as to merchantability, fitness for a partic-
ular purpose, warranties arising from course of dealing or usage or trade or any other matter with respect  to 
its replacement products. 
 
No employee representative or agent of LabStrong™ has any authority to bind the company to any affirma-
tion, representation or warranty. 

 
 
 
 
 
 
 
 

Copyright  
 

©2019 LabStrong™ Corporation. ALL RIGHTS RESERVED. THIS MANUAL OR PARTS THEREOF MAY NOT BE RE-
PRODUCED IN ANY FORM WITHOUT WRITTEN CONSENT OF LABSTRONG™. 
 

Trademarks  
 

LabStrong™, Rapids™ and LabStrong Link™ are trademarks of LabStrong™ Corporation. All other trademarks 
are trademarks of their respective manufacturers.  

iii 

Summary of Contents for Rapids D003312






















































Reviews: