INSTRUCTION MANUAL FOR THE INSTALLER
LSI 001 -EN- REV. 06
55
• SETTING MENU FOR HOT WATER DELIVERY DOSE
1. Press and hold down the button
for about
5 seconds, the symbols
and “
p” will flash.
2. Press the button
the display will show the symbol “
t” flashing.
3. Press the button
again, the display will show the
4
3
2
1
flashing.
4. Press the button
the display will show the symbol “
th” flashing.
Press the button
, the display will show:
where the value “
004” corresponds to the preset time in seconds for the hot water dose.
Proceed with the setting of the hot water dose, as follows:
1. Place a pitcher below the hot water nozzle (7) in order to avoid any possible burns.
2. Press the hot water button (6) to start hot water delivery.
3. Once the desired dose has been reached, press the same button again (6) to stop the delivery (the
display will show the preset time in seconds, even if the program is storing the datum in tenths of
seconds).
4. Press the button
to confirm the setting.
At the end of the
HOT WATER DELIVERY DOSE setting phase, as soon as the last setting has been
confirmed with the button
, the display will show the flashing symbol “
th”.
