INSTRUCTION MANUAL FOR THE INSTALLER
LSI 001 -EN- REV. 06
59
• SOUND BEEp SETTING MENU (version 8 software).
1. Press and hold down the button
for about
5 seconds, the symbols
and “
p” will flash.
2. Press the button
the display will show the flashing symbol “
t”.
3. Press the button
again, the display will show the flashing symbols
4
3
2
1
.
4. Press the button
he display will show the flashing symbol “
th”.
5. Press the button
the display will show the flashing symbol
.
6. Press the button
the display will show the flashing words “
OFF:On”.
7. Press the button
the display will show the flashing word “
MIX”.
8. Press the button
the display will show the flashing word “
BEEp”.
1. Press the button
, the display will show:
If you press the button to select “
ON” (flashing) the sound beep will remain enabled. If you press the button
to select
“OFF” (flashing) and confirm the setting with
the sound beep will be deactivated.
ELECTRIC CUp WARMER
For better pre-heated cups, it is possible to use the additional electric cup warmer, pressing the button
and checking the operating status through the lighting up of the corresponding symbol
on the
display (33). Press the same button to switch it off.
b E E P
b E E P
