INSTRUCTION MANUAL FOR THE INSTALLER
LSI 001 -EN- REV. 06
85
When the display is connected, it will read “
La Spaziale” for about 5 seconds followed by the version of
the control board fitted on the machine for another
3 seconds.
After the above cycle, the display will read:
N O
D A T A
to indicate that the technical assistance is deactivated.
To enable one or both available controls, proceed as follows:
hold down the button
OK
for about
3 seconds, this opens the SERVICE menu and the display will read:
S E R V I C E
Y N
5.8 SCHEDULED TECHNICAL ASSISTANCE pROGRAM – G.A. - (optional)
The scheduled technical assistance program makes it possible to keep some appliance parameters under
control, making it possible to set a minimum threshold after which an alarm signal is given.
The program makes it possible to organise regular routine maintenance for the delivery groups (enabling
the
SERVICE menu) and/or the replacement of the filter cartridge or resin regeneration for the softener
(enabling the
FILTER menu).
The appliances preset for this function still have the technical assistance program deactivated.
NOTE. To enable these controls it is necessary to have the technical assistance display (pict 19).
Where “
Y” (Yes) will be flashing. To select “N” (No) press one of the 2 arrow keys
,
“N” will start to
flash. If you press the button
OK
the control of delivery cycles will remain deactivated, passing directly to
the softener
FILTER settings.
19
