22
Figure 30 – Installing power cables for two AC dual-live wire inputs
(1) Short-circuit copper bar 1
(2) Short-circuit copper bar 2
(3) Short-circuit copper bar 3
(4) Short-circuit copper bar 4
Step 4
Reinstall the AC input protective cover.
Step 5
Reinstall the rear cover for the DCPS.
(Optional) Installing Power Cables for One AC Dual–Live Wire Input
Step 1
Install short-circuit copper bars. Connect AC input terminals 1-L1, 2-L1, 3-L1, and 4-L1 by
using short-circuit copper bar 1. Connect AC input terminals 1-L2, 2-L2, 3-L2, and 4-L2 by
using short-circuit copper bar 2. Then secure the copper bars by using screws.
Step 2
Route AC input power cables through an appropriate cable hole on the rear of the subrack.
Step 3
Secure the AC input OT terminals to the corresponding short-circuit copper bars, as shown in
Figure 31.
Figure 31 – Installing power cables for one AC dual-live wire inputs
