14
3.3 Installing
Components
3.3.1 Installing
Rectifier
Prerequisites
Rectifiers are found intact after unpacking and check. In case of any discrepancy,
contact the La Marche office.
The filler panels on the slot for installing the rectifiers have been removed from the
cabinet.
Procedure
Step 1
Push the locking latch towards the left.
Step 2
Draw the handle downwards.
Step 3
Gently push a rectifier into its slot along the guide rail.
Step 4
Push the handle upwards.
Step 5
Push the locking latch towards the right to secure the handle.
Figure 16 – Installing a rectifier
3.3.2 Installing Circuit Breaker
Procedure
Step 1
Remove the front panel from the DCPS, as shown in Figure 17
Figure 17 – Removing the front panel from the DCPS
Step 2
Remove the top cover from the DCPS.
