![background image](http://html2.mh-extra.com/html/l3/fa2100-cvr/fa2100-cvr_component-maintenance-manual-with-illustrated-parts-list_3095802258.webp)
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 701
Apr. 14/16
Assembly
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
ASSEMBLY
1.
GENERAL
This section contains procedures describing the assembly of the Model FA2100 Cockpit
Voice Recorder as well as storage instructions after assembly. There is no special testing
necessary during assembly. However, once assembly is completed, the operational test
procedure provided in the Testing and Troubleshooting Section 100 should be performed
to verify proper operation of the Recorder.
2.
REQUIRED MATERIALS
Special equipment required for testing and assembly of the recorder can be found in
Table 901 of the Special Tools, Fixtures, and Equipment Section 900 of this CMM.
Table 701 provides a list of the common assembly materials used with the FA2100 Cock-
pit Voice Recorder.
Table 701. Required Assembly Materials
Item
Manufacturing and Specification
Use
1.
Adhesive
Loctite, Grade E, Purple No. 222
Lock/sealant manufactured by Loctite Corp.,
705 N. Mountain Rd.,
Newington, CT 06111 [V05972]
Retain screw
2.
Torque Wrench
Local tool supplier
Range: 5
−
6 in/lbs
End Range: 75 in/lbs
CSMU & Beacon Brack-
et mounting screws
(75 in/lbs.); Chassis
Cover screws (9-10 in/
lbs; and Rear Panel &
AP board screws (5-6 in/
lbs.)
3.
RTV Adhesive
Dow Corning RTV 3145 (V71984)
L-3 p/n: 0601200006, or equivalent
Chassis
4.
Tape, Polymide
MMM (3M) 5413
L-3 p/n: 2529800034, or equivalent
Chassis
5.
Tool, Assembly
Support
L-3 p/n: 980E2196-00, or equivalent
Audio Compressor PWA
Installation
6.
Tool,
Seal Align-
ment, Short Chassis
L-3 p/n:
980E2188-00
, or equivalent
Chassis Seal
Installation
7.
Tool,
Seal
Applicator
L-3 p/n:
980E2189-00
, or equivalent
Chassis Seal
Installation
The document reference is online, please check the correspondence between the online documentation and the printed version.