manualshive.com logo in svg

L3 FA2100 CVR, Component Maintenance Manual With Illustrated Parts List

Share
Download
L3 FA2100 CVR Component Maintenance Manual With Illustrated Parts List Download Page 6

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Highlights

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

Rev. 15  Page vi

Apr. 14/16

RECORD OF HIGHLIGHTS (Continued)

Issue

Revision

Date of

Change

Comments

Revision

07

Dec. 01/08

Updated for Revision. Added SB011, SB012,
SB013, SB014, SB015, SB 016. Changed the
List of Effective Pages to reflect the Revision 07,
added divider to Table of Contents. Added refer-
ence to ROC/6, updated date for Autotest confir-
mation. Added Beacon Test note, changed con-
tent per SB013, corrected reference to Data Link
(ATC) Interface. Added Beacon Test note, added
Acquisition Processor configuration, added refer-
ence to ROC/6. Updated part numbers, correc-
ted test setup diagram, added RIU power cau-
tions, verified ROC/6 part list. Added configura-
tion. Updated Test Equipment lists, corrected test
diagram. Updated Numerical Parts Index to re-
flect changes in service bulletins. Updated the
IPL to reflect p/n 21001026

−

02.

Revision

06

May 01/07

Added new Section 200, Automatic Testing for
operational testing of CVR to include the ROC6
/w CATS software.  Revised Disassembly & As-
sembly sections to include p/n’s: 2100

−

1025

−

12

& 

−

22, Audio Compressor and Crash Survivable

Memory Unit.  Revised Description Section for
new p/n: 2100

−

1025

−

12 & 

−

22,  Audio Compres-

sor and Crash Survivable Memory Unit. Updated
Test Procedures and Checksum Information for
Revisions 5 software and ROC6 /w CATS soft-
ware. Revised Figure 104 to include all Acquis-
tion Processor  configurations. Added new Table
105, CVR fault code corrective actions. Added
ROC6 /w Cats software to Special Tools and Test
Equipment Section. Updated the IPL to reflect
p/n: 2100

−

1025

−

12 & 

−

22 CVR, Audio Compres-

sor and Crash Survivable Memory Unit. This in-
cludes all Temporary Revisions, including TR6
and Service Bulletins SB008, SB009 and SB010.
Revised Description and Test Procedures to in-
clude pre and post MOD

−

DOT #7 units.  Revised

beacon battery replacement date.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for FA2100 CVR















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands