background image

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Rev. 15  Page 303

Apr. 14/16

Disassembly

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

BEACON REMOVAL PROCEDURE

(1)

To remove the Underwater Acoustic Beacon (1-80) from the Beacon Mount
Bracket (1-70), use a 3/16” Allen hex-wrench, remove the two left 1/4–20, hex-
cap screws (1-75) that secures the left Beacon Mount Bracket to the CSMU.

(2)

Loosen the lower right hex

cap screw (1-75) which secures the right Beacon

Mount Bracket to the CSMU and holds the beacon in the bracket.

(3)

The beacon can now be removed from the Beacon Mount Bracket.

(4)

If the CSMU requires removal, then remove the right beacon bracket mount
from the CSMU assembly.

Left Beacon 

Mount Bracket

(1-70)

Right Beacon 

Mount Bracket

(1-70)

Underwater 

Acoustic Beacon

(1-80)

1/4” Hex

cap Screw

(1-75)

Crash Survivable

Memory Unit

(CSMU)

(1‐185)

Water Switch

Figure 301.  

Underwater Locator Beacon Removal Diagram

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for FA2100 CVR















































































































































































































































































































































Reviews: