COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 308
Apr. 14/16
Disassembly
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
(1)
Remove the CSMU memory assembly (1-185) as described in paragraph B.
above.
(2)
To gain full access to the Acquisition Processor PWA (1
−
175) remove the 10 pan-
head sealing screws (1-25) and lift chassis cover (1-20) from the recorder chassis.
NOTE:
Pan-head sealing screws (1-25) are one time use items that
should be discarded when removed and replaced with new
screws.
(3)
Disconnect the Aircraft Interface PWA interconnection cable assembly, W001
(1-165), from J2 on the Acquisition Processor PWA.
(4)
Disconnect the Audio Compressor PWA interconnection cable assembly, W003
(1-165), from J4 on the Acquisition Processor PWA.
(5)
Remove 8 flat-head screws (1-95) that secure the rear panel assembly (1-90) with
attached Aircraft Interface PWA and Audio Compressor PWA into the recorder
Chassis (1-5).
NOTE:
Flat-head screws (1-95) are one time use items that should
be discarded when removed and replaced with new screws.
(6)
Lift the rear panel assembly away from the chassis.
(7)
Remove 10 pan-head screws (1-180) that secure the Acquisition Processor PWA
to the recorder chassis.
(8)
Carefully slide the Acquisition Processor PWA from the rear of the recorder chassis
while observing proper ESD handling techniques.
(9)
Package Acquisition Processor PWA in a static-resistant container for shipment to
the factory for repair.
The document reference is online, please check the correspondence between the online documentation and the printed version.
